INDECO interior fit-out materials and furniture priced from real project quotations
COST GUIDE · QUOTED, NOT ESTIMATED

Interior Fit-Out Cost Guide

Every range below is a figure we have actually quoted or delivered — villa and apartment packages, kitchens, factory-direct furniture and container logistics from Foshan to Africa and the Gulf.

A cost guide is only useful when the numbers are real.

An interior fit-out cost guide is a published set of price ranges taken from delivered quotations rather than market surveys. INDECO's ranges below come from villa, apartment and commercial projects we have quoted in East Africa, West Africa and the Gulf, stated in USD and normalised to the same basis: supply from Foshan, one consolidated container, before local installation unless noted.

Two caveats hold for every figure. First, the spread inside a range is set by how much natural stone, bespoke joinery and solid timber the schedule carries — the spec, not the supplier, moves the total. Second, all prices are FOB Foshan unless the line says otherwise; the landed-cost components that sit after the invoice are itemised in our import guide.

What is the cost per square metre of a full fit-out package?

Project typeQuoted range (USD per m²)Basis
Standard villa interior package285 – 525Built area, e.g. 260 m² villa = 74,000 – 131,000
Luxury villa package350 – 700Average across quoted villas; bathrooms 450 – 950, living areas 380 – 800
Home interior package (320 m², Dar es Salaam)300 – 52596,000 – 168,000 depending on stone and joinery share
City apartment (90 m² two-bedroom)180 – 320Full interior package
Office interior package180 – 420Commercial, Africa and Gulf
Retail interior package150 – 400Commercial, Africa and Gulf
Restaurant interior package250 – 600Commercial, Africa and Gulf

What do individual rooms and line items cost?

ItemQuoted range (USD)Note
Custom kitchen cabinetry900 – 2,200 per linear metreSupply and installation; a 6 m U-shaped villa kitchen lands at 16,000 – 38,000 including appliances
Fitted bedroom (18 m²)5,100 – 9,100 fully fittedJoinery, lighting and soft furnishings included
Living room package (42 m²)14,000 – 26,000330 – 620 per m², Dar es Salaam benchmark
Villa joinery, cove lighting and loose furniture38,000 – 65,000 EXW FoshanBefore freight and local installation
Decoration layer (loose, replaceable)28,000 – 46,000 on a 320 m² villa12 – 18% of total interior spend
3D render set (six frames)900 – 1,600Credited in full against any material order above 25,000; further rounds at 120 per frame

How much cheaper is Foshan furniture than local retail?

PieceFOB Foshan (one container)Nairobi retail equivalent
Three-seater sofa390 – 720980 – 1,400
Two-seater sofa300 – 540—
Armchair180 – 320—

On the same specification the factory-direct gap is roughly 35 to 55 percent. The gap is widest on casegoods and joinery, narrowest on soft goods where freight is a large share of value.

What does freight from Foshan cost and how long does it take?

ItemFigure
40 ft high-cube capacity≈ 55 – 65 m³, enough for one mixed villa order
Splitting one order into three shipmentsadds 2,800 – 4,200 in freight and breaks the install sequence
Port-to-port transit — East Africa18 – 28 days
Port-to-port transit — West Africa25 – 35 days
Port-to-port transit — Gulf12 – 20 days
Production after sample approval2 – 4 weeks

Frequently asked questions

What does an interior fit-out cost per square metre?

Across the projects we quote in East Africa and the Gulf, a standard villa interior package lands between USD 285 and 525 per square metre of built area, a luxury villa package between USD 350 and 700, and a city apartment between USD 180 and 320. On the commercial side, an office package typically runs USD 180 to 420 per square metre, retail USD 150 to 400 and restaurants USD 250 to 600. Every figure in this guide is a range we have actually quoted, not a market average.

What is the single biggest lever on the total cost?

The share of stone and bespoke joinery in the schedule. On the same villa, the spread between the bottom and top of any cost range is almost entirely how much natural stone, custom cabinetry and solid timber appear in the spec. A decoration package — the loose, replaceable layer — runs USD 28,000 to 46,000 on a 320 square metre villa, roughly 12 to 18 percent of the total interior spend; the built layer beneath it is what sets the headline number.

Does consolidating into one container really save money?

Yes, and the saving is measured in freight cycles, not just sea legs. A single 40-foot high cube carries roughly 55 to 65 cubic metres, enough to mix cabinetry, tiles, doors and furniture in one loading. Splitting the same order into three shipments adds USD 2,800 to 4,200 in freight alone and lands the joinery on site before the stone.

Is factory-direct really cheaper than buying locally?

On furniture, roughly 35 to 55 percent on the same specification. A three-seater sofa that retails at USD 980 to 1,400 in Nairobi leaves our Foshan factory at USD 390 to 720 in one-container quantities. The gap widens on casegoods and narrows on loose soft goods where freight share is high relative to value.

What costs appear after the factory invoice?

Ocean freight, marine insurance, destination port charges, customs duty and VAT, clearing-agent fees, inland trucking and demurrage if the container waits at the port. Port-to-port transit from Foshan runs 18 to 28 days to East Africa, 25 to 35 days to West Africa and 12 to 20 days to the Gulf, with production adding two to four weeks after sample approval. Our read-on import guide covers each component in detail.

Send the schedule, get a priced BOQ

Ranges tell you whether a project is possible; a line-by-line BOQ tells you what it costs. Send drawings or an area schedule and we return an itemised quotation with the Incoterm, packing list and container plan stated. Read the import guide for landed-cost components, or the supplier page for how a one-PO supply works. Contact INDECO.